How To Make Mosaic Tables

How mosaics can be used in decorations in the home.pre-drawn layout of the design. A tool is used to
A great use for mosaics is in tables, and this articlepush the tiles down into place onto the adhesive.
will tell you how to make one.Now, a cement is made, consisting of water, special
One of the oldest and most beautiful forms ofcement and whatever color is desired for the spaces
artwork is mosaics. Mosaics are made from mosaicbetween the tiles. The concrete is poured into the
tiles, glued together to form a picture or particularmold, so that it seeps into the pre-arranged design
design. Mosaic tables are one of the most popularbut does not completely cover it. The mold is then
uses of mosaic art; the top of the table is coveredgently tapped down to remove air bubbles from the
with a lovely mosaic design and then placed upon acement. It should be left to dry for at least an hour.
table, which can have either a wooden or wroughtOnce the concrete is try, the mold should be turned
iron base. A mosaic table adds a beautiful touch ofupside down and then the adhesive is peeled off. To
color to any room.keep the design clean and clear looking, any excess
Artisans have been designing mosaic table tops forcement should be removed with a dampened
eons, but anyone with some crafting ability can makesponge, and a small scraper. The mosaic for the table
a mosaic table of their own. A mold, sometimes justtop is ready, and just has to be properly attached to
a stone stepping stone is used as the base. A piecethe table you are using.
of adhesive is cut to fit the mold, and then theIt is important to remember that you are working
design that is desired for the table is drawn on theupside down to make the design. This is called the
other side of the adhesive paper. This will be used to"indirect" method. The importance of this is that if
form the template for the pieces of mosaic (cutyour design includes words, numbers or a scene that
glass or stone) to be placed to form the design. Theshould be viewed a certain way, it will be backwards
mold is covered with petroleum jelly and thewhen the mold is turned over. This has to be taken
adhesive paper is placed on it, sticky side up. Next,into account when the design is made in the first
the precut glass pieces are are arranged on theplace.